Tag Archives: Vertical Cutting Dryer

Our Factory Delivered a Dryer and a Centrifuge.

On June 11, 2021, the factory delivered a TRCD930C vertical cutting dryer and TRLW355×1250N decanter centrifuge before the Dragon Boat Festival holiday. After blanking, welding, processing, heat treatment, assembly, commissioning, painting, inspection and other multiple processes, the two equipment will be sent to the customer site.

 TRCD930C Vertical Cutting Dryer
TRCD930C Vertical Cutting Dryer 

Advantages of TRCD Series Vertical Cutting Dryer

  • Rotary speed up to 900rpm,separate cutting in liquid effectively;
  • Discharge scraper made of high chromium cast iron,long service life;
  • High-pressure air knife effectively prevents the basket block;
  • Replaceable selection parts meet the machine balance;
  • Separate oil cooling system effectively meets the requirements of high temperature environment.
 TRLW355×1250N Decanter Centrifuge
TRLW355×1250N Decanter Centrifuge

TRLW355×1250N Decanter CentrifugeFeatures of TRLW Series Decanter Centrifuge

  1. Straight and cone section of the drum are made from 2205 duplex stainless steel material,adopt centrifugal casting process;
  2. Remaining components of the drum assembly are made from SS316L;
  3. Screw carrier adopts YG6 wear-resistant alloy sheet protection.With long life,easy maintenance and replacement;
  4. Diversion port of screw pusher and slag-drip opening of the drum are protected by replaceable wear-resistant alloy sleeve,prolonging the service life and maintenance cycle.

Xi’an Tianrui Petroleum Machinery Equipment Co., Ltd. is a manufacturer of solid control equipment and solid control system. Its main products include mud shale shaker, drilling fluid desander, drilling fluid desilter,mud cleaner, shear pump, drilling fluid centrifuge, sand pump, mud mixer, drilling cuttings dryer, etc. if you need, you are welcome to contact us: sunny@trsolidscontrol.com

Video Feedback Videos of Vertical Cutting Dryer and Decanter Centrifuge on Site

As China’s domestic environmental protection requirements continue to increase, oil drilling sites also require mud not to be treated on the ground. In addition, this scheme has been widely used in international market of many countries.

Main configured equipment ordered by our client covers TRCD930C vertical cutting dryer, TRLW355N-1 high speed centrifuge, mud tank and other auxiliary accessories. Drilling waste management is known as drilling fluid non-grounding, which refers to the use of mud non-grounding equipment to filter out the waste in drilling fluid. Mud non-ground treatment equipment can turn waste drilling mud into treasure, since oil-based mud is a kind of hazardous waste. Drilling waste management produced by TR Solids Control can make the waste oil-based drilling mud treated and reused, which not only reduces drilling cost, but also meets the requirements of environmental protection.

The followings are live videos of customer feedback.

TR Vertical Cutting Dryer Running Video

TR Decanter Centrifuge Running Video

TR Decanter Centrifuge Running Video

Oil Based Mud Not-landing System Ready for Shipment

The oil-based mud not landing system customized by a domestic customer helps the environmental protection of oil drilling mud not landing again. With the continuous improvement of domestic environmental protection requirements in China, in order to respond to and adapt to the national environmental protection requirements, the oil drilling site also requires mud not to land

Oil Based Mud Not-landing System
Oil Based Mud Not-landing System

Mud not landing system is the common name of drilling waste treatment, also known as drilling fluid does not land, refers to the use of mud not landing equipment to screen the waste in drilling fluid. The equipment for mud not falling to the ground generally includes drying shaker, drilling cuttings dryer and high-speed mud centrifuge.

Decanter Centrifuge
Decanter Centrifuge

Drilling waste mud can be turned into treasure by the mud treatment equipment without landing, because oil-based mud is a kind of hazardous waste, and the state has strict requirements for hazardous waste treatment. The mud treatment equipment produced by TianRui can reuse the waste oil-based drilling mud after treatment, which not only reduces the drilling cost, but also meets the requirements of environmental protection.

Vertical Cutting Dryer
Vertical Cutting Dryer

TianRui solid control has always adhered to the enterprise concept of “customer satisfaction is the highest pursuit of TianRui solid control”, and constantly develops new mud purification equipment. We thank our customers for their trust in us, and we will continue to work hard to make greater contributions to drilling mud purification and national environmental protection.

TR Solids Control attends the 2020 China Marine Economic Expo.

TR Solids Control attends the the 2020 China Marine Economic Expo will be held in Shenzhen Convention and Exhibition Center from October 15th to 18th. Our booth number is 1B-T022 . We exhibited TRCD800 vertical cutting dryer,TRSB3×2 centrifugal pump head,TRLWF450X1250N decanter centrifuge and TRZS584 shale shaker. Welcome all partners and customers to visit our booth and discuss cooperation. We are sincerely looking forward to your visiting and consulting.

2020 China Marine Economic Expo
Our booth number : 1B-T022

In this exhibition, we showed our newly designed drill cuttings dryer and Mission series centrifugal pump. Vertical cutting dryer is a type of drying machine for treating sludge in drilling waste management. It can be called vertical centrifuge from structure. Centrifugal Pump is used for transferring slurry or water. It can be used as feeding pump for desander and desilter, or used as mixing pump for jet mud mixer. From 930 series vertical cutting dryer to 800 series dryer, from SB8×6 centrifugal pump to the SB3×2 centrifugal pump, the classic designs of TR conform to the important development of oil drilling environmental protection equipment requirements.

 TRCD730 vertical cutting dryer
TRCD730 vertical cutting dryer
 TRSB3×2 Centrifugal Pump Head
TRSB3×2 Centrifugal Pump Head

We also showed TRLW series decanter centrifuge is that widely used in trenchless HDDcity bored pilingoil & gas drillingDrilling Waste Managementtunneling construction, environment protection, chemical Industry, food industry, Pharmaceutical Industry,Oil Sludge Dewatering Systems, Coal Bed Gas Solids Control System, Oil Mud Seperation, mining, Water Drilling etc. And TR series shale shaker is a high strength vibrating screen independently in order to meet the domestic and international market demand and environmental protection requirements. Dual motion shaker with three motors,two kinds of motion trajectory can be switched at will to meet different needs of customers.

 TRLWF450×1250N Decanter Centrifuge
TRLWF450×1250N Decanter Centrifuge
TRZS584 Shale Shaker
TRZS584 Shale Shaker

TR Solids Control is a well-know manufacturer of solids control equipment in China. We have established a complete quality control system, all products & equipment manufactured as per international standard and API standard. At present, our company has formed more than 50 series and more than 100 specifications of products, which have been widely used in all oil fields in China and have been exported to Europe, America, Southeast Asia, the Middle East, Central Asia, and North Africa and other regions.

TR Solids Control attends the 4th China International Industrial Products Purchasing Exhibition

TR Solids Control attends the 4th China International Industrial Products Purchasing Exhibition held in Baoji city from Sep.3rd to Sep.5th. Our booth number is A570. We exhibited TRCD800 vertical cutting dryer & TRSB3×2 centrifugal pump head. Welcome all partners and customers to visit our booth and discuss cooperation. We are sincerely looking forward to your visiting and consulting.

Solid control manufacturer, mud recycling system

TR vertical cutting dryer and centrifugal pump in Baoji Purchasing Exhibition.

In this exhibition, we showed our newly designed drill cuttings dryer and Mission series centrifugal pump. Vertical cutting dryer is a type of drying machine for treating sludge in drilling waste management. It can be called vertical centrifuge from structure. Centrifugal Pump is used for transferring slurry or water. It can be used as feeding pump for desander and desilter, or used as mixing pump for jet mud mixer. From 930 series vertical cutting dryer to 800 series dryer, from SB8×6 centrifugal pump to the SB3×2 centrifugal pump, the classic designs of TR conform to the important development of oil drilling environmental protection equipment requirements.

Drilling vertical cutting dryer, drilling waste management

TRCD730 vertical cutting dryer is our newly designed for drilling waste management,

TR Solids Control is a well-know manufacturer of vertical cutting dryer and centrifugal pump for more than 10 years in China. We have established a complete quality control system, all products & equipments manufactured as per international standard and API standard. At present, our company has formed more than 50 series and more than 100 specifications of products, which have been widely used in all oil fields in China and have been exported to Europe, America, Southeast Asia, the Middle East, Central Asia, and North Africa and other regions.

TR Vertical Cutting Dryer is your best choice

TR Vertical Cutting Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up 900RPM with G force to 420G or super high speed 1200RPM with G force to 750G. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is crucial for proper operation.

TR Vertical Cutting Dryer also has the following merits:

  • Speed up to 900rpm, it can form 420G separation factor.Effectively separate the liquid from the cuttings.
  • Discharging scraper is made of high chromium cast iron. Long service life.
  • Assembly of high pressure air knife can effectively prevent sieve basket blocking.
  • Each replaceable selection component go through dynamic balancing testing, meet the overall balance of the replacement parts.
  • Independent oil circuit cooling system equipped with a scientific fuel tank cooling system. 

     Vertical Cutting Dryer | High efficiency dryer | Long life dryer

    Vertical Cutting Dryer | High efficiency dryer | Long life dryer

    Contact Us:TR Solids Control
    Sales office:No.10 West of North 2nd Ring Road Xi’an City.
    Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.
    Tel:+86-29-86332919
    Call:15339143604
    E-mail:allan@trsolidscontrol.com
    Web:www.chinasolidscontrol.com
    www.trsolidcontrol.com