Shale shaker screen separation process

During the drilling process, the solid-liquid separation process begins when the drilling fluid flows on the shale shaker screen surface after passing through the circulatory system to carry the cuttings back to the wellhead, then through the elevated tank, the buffer tank and the shunting plate till onto the shale shaker screen.This kind of design can reduce the direct impact on the shaker screen.This is also one reason that can influence the longevity of the shaker screen.

                                           Drilling Linear Shale Shaker Manufacturer

Solid-liquid separation is a process, it is impossible to immediately separate all the drilling fluid when the mud fluid just flow to the shaker screen. When a small part of the mud fluid passes through the shaker screen, most of the mud liquid immediately spread out along the shaker screen, forming a layer of mud. Mud layer becomes thinner and thinner with the separation process going on, until at last reaches one certain position,generally called liquid phase termination line. In this process, large solid particles are repeatedly thrown, small particles and liquid passing through the screen into the mud tank to start the next cleaning stage,such as desander and desilter.Over the termination line solid particles continue to move forward until being discharged. The liquid phase termination line is normally located in the 2/3 to 3/4 effective length of the shaker screen when the shale shaker works normally.

Xi’an TR is a professional manufacturer of mud shale shaker and drilling fluid solid control equipment,widely applied in oilfield drilling,mineral mining,HDD and trenchless system,etc.At the same time,TR provide series of shaker screens for our clients,such as frame shaker screen(Swaco Mongoose,Brandt BL-50,Brandt VSM300),

                                                  FLC500 flat Shale Shaker Screen

hook strip screen(Derrick FLC series shaker screen) ,hook strip soft screen.

                                              DEERICK FLC2000 Screen|Shaker Screen

TR Solid Control is also an exporter of mud shale shaker,drilling fluid shale shsker and related shaker screen.Welcome to TR Solid Control to consult and guide the mud shale shaker and other solid control equipment.

Contact:  Mark

Sales office:No.10 West of North 2nd Ring Road Xi’an City.

Manufacture: No.60 Caotang Industry Zone Huxian County Xi’an City.

Tel:+86-29-86332919

Call:+86-13186019379

Whats App:13186019379

E-mail: mark@trsolidscontrol.com

Web: www.chinasolidscontrol.com

            www.trsolidcontrol.com

            www.trsolidscontrol.com

            www.tr-shale-shaker.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *