Category Archives: Post
TRNJQ80-3 Mud Guns were Boxed and Sent Overseas
15 sets of TRNJQ0-3 mud guns ordered by foreign client in our company have been produced, boxed and sent overseas.
The mud gun is mainly used in the drilling mud circulation system, also known as the drilling fluid gun. It is mainly used to wash and mix the dead corners that cannot be stirred by the mud agitator in the drilling fluid circulation tank, and fully mix the drilling fluid in the circulation tank, so as to evenly suspend the solid particles in the drilling fluid, which is convenient for the hierarchical separation of drilling fluid purification systems at all levels, prevent mud from settling in the drilling mud tank. The mud gun can also be used together with the drilling fluid mud shear pump or jet mud mixer. It is used for mud transportation between silos in the mud system, which can perfectly combine and coordinate the drilling fluid and mud of each solid control system, and make the whole solid control system a unified whole.
The mud guns ordered by the client this time are TRNJQ80-3 mud gun produced by our company. The main pipe of TRNJQ80-3 mud gun is 3-inch thick wall seamless steel pipe and 3 mud nozzles. The mud gun has the advantages of simple structure, flexible operation (360 ° omni-directional rotation), convenient use and long service life. It is an ideal oilfield mud gun to prevent mud precipitation.
TR Solids Control is a mud gun manufacturer. The company can customize mud guns of different specifications and sizes according to user requirements. For more information about mud guns, please contact +86 13186019379 at any time.
TR Mud Agitators are Loaded and Shipped Again
The production of the second batch of TRJBQ11 (11kW) and TRJBQ2.2 (2.2kW) mud agitators ordered by the customer in our company was completed and loaded and shipped as required.
The delivery is the same as the first batch. There are 22 sets of TRJBQ11 (11kW) mud agitators and 8 sets of TRJBQ2.2 (2.2kW) mud agitators. The main color is blue, the color of coupling protective cover is yellow, the supporting motor of TRJBQ11 agitator is YB3-160M-4 (11kW), two-stage energy consumption, the reducer is TWPX175-A (speed ratio is 1:20), the rod length is 1650mm, and the double-layer blade structure; The supporting motor of TRJBQ5.5 agitator is YB3-100L1-4 (5.5kW), two-stage energy consumption, the reducer is TWPX120-A (speed ratio is 1:20), the rod length is 1000mm, and the single-layer blade structure.
The mud agitator is mainly used for mixing and mixing the drilling fluid to prevent the solid particles of the drilling fluid from depositing in the circulating system, so as to stabilize the performance of the circulating drilling fluid and mix evenly. It is a common mud mixing equipment on the drilling site; TR Solids Control is a manufacturer of mud agitator. The company can customize mud agitators with different power, rod length and blade size according to customers’ on-site requirements, and provide customers with mud agitators suitable for on-site use. If you need a mud agitator, you can contact us at any time: +86 13186019379.
Horizontal Gear Oil Pump was Sent to Nairobi, Kenya
This month, the Kenyan customer ordered a horizontal gear oil pump from our company. According to the parameter requirements provided by the customer, we recommended WBZ100 model to him. After two days of communication, the customer finally determined a trial order.
This product is suitable for oil lubrication system or hydraulic transmission system, seat conveying lubricating oil or oil pump as the power source of hydraulic system. It can also be used to discharge non corrosive lubricating liquid medium. Industrial lubricating oil or hydraulic oil with viscosity grade of N22 ~ N460 (equivalent to ISO VG22 ~ VG460).
Our company produces various pump products and has been exported to various countries in the world. If you have any pump demand, please feel free to contact us.
TR Mud Agitators were Produced and Tested in Our Plant
The first batch of coupling type mud agitator ordered by the customer in our company has been produced and tested in the factory, and they can be sent to the site designated by the customer at any time.
The mud agitators ordered by the customer include TRJBQ11 and TRJBQ2.2, with a total of 68 sets, which are distributed to the customer’s designated site in 3 batches. The first batch of production was completed, and the remaining two batches will be sent later.
According to the customer’s requirements, the main body color of 22 TRJBQ11 and 8 TRJBQ2.2 mud agitators delivered this time is blue, the color of coupling protective cover is yellow, the supporting motor of TRJBQ11 agitator is YB3-160M-4 (11kw), the reducer is TWPX175-A (speed ratio is 1:20), the rod length is 1650mm, and the double-layer blade structure; The supporting motor of TRJBQ5.5 agitator is YB3-100L1-4 (5.5kW), the reducer is TWPX120-A (speed ratio is 1:20), the rod length is 1000mm, and the single-layer blade structure.
Xi’an Tianrui Petroleum Machinery Equipment Co., Ltd. is a manufacturer of mud agitator. The mud agitators produced by us are mainly used for mixing drilling fluid to prevent the deposition of solid particles of drilling fluid in the circulating system and make the performance of circulating drilling fluid stable and mixed evenly. They are common mud mixing equipment for drilling into the site; We can customize mud agitators with different power, rod length and blade size according to the customer’s on-site requirements, and provide customers with mud agitators suitable for on-site use.
If you need a mud mixer, you can contact us at any time: +86 13186019379
New Order for Safety Clamps from Singapore Customer
At the beginning of September, we received an order for safety clamps from new customer in Singapore, requiring the delivery of three sets of T type safety clamp (range 2 1 / 8 “- 3 1 / 4” with wrap).
Our safety clamps products are deeply loved by customers in Southeast Asia. As a trial order, our factory strictly controls the quality. As the beginning of long-term cooperation, we delivered this order within three days. After a short sea voyage, the safety clamps will arrive at the customer’s port soon.
Safety clamps are just an auxiliary device,is in accordance with API standards and do not carry torque for operation.T type safety clamp,size range 2 1/8″- 3 1/4″,total number of links is 5pcs.
Our company supplies safety clamps of various models and sizes. If you have any demand, please feel free to contact Sunny Lee:<sunny@trsolidscontrol.com>
A Single-stage Centrifugal Pump Ordered by a Malaysian Customer
In May, we received an inquiry from Malaysia. His demand is a single-stage centrifugal pump with motor power of 18.5kw and 6 inch for outlet and inlet piping.
According to the customer’s needs, we recommended the 150-160A model to him. The customer said that some modifications should be made in the installation size. After a week of negotiation, the final details were determined.
The customer placed a purchase order with us at the end of August. After a week of production, the goods have been successfully delivered to the freight forwarder.
ALW horizontal centrifugal pumps are used to handle clean water and liquids similar to water in physical and chemical properties. They are applicable to industrial and city water supply and drainage, pressurized water supply in high-rise constructions ships, garden irrigation fire-fighting pressurization, distant transportation, heating, ventilating, refrigeration circulation, and bathrooms for cyclic pressurization of cold and hot water, and other equipment. Temperature of service medium not exceeding 85°C.
We are a manufacturer specializing in producing all kinds of pump.If you need any, please contact:< sunny@trsolidscontrol.com >.
Replacement Derrick Hyperpool Pyramid Screens Shipped to Iraq
At the beginning of August, we received an order of 145 replacement Derrick Hyperpool pyramid screens,and after ten days of production,we completed this batch of shaker screens for new customer. They will be used on their Derrick Hyperpool shale shaker in oil drilling field. Usually shaker screen is fine mesh (single, dual or triple layered) used for filtering and separating drilling cuttings from mud(drilling fluid). It is of great importance to drilling efficiency. TR Solids Control is committed to designing high quality shaker screens to provide our clients the right screen for perfect fit at competitive price.
As for this order, it includes 145 pcs pyramid type with API50,80,100,140,200. Mesh sizes of pramid shaker screen are smaller and thinner than that of the steel frame shaker screen. The fine mesh sizes maximize the solids removal capabilities of the screen. It is suitable for various types of shakers, such as linear motion shale shakers, elliptical and circular motion shale shakers. Polyurethane type screen panel is made of polyurethane sheet with high quality screen surface. This kind of screen is abrasion resistance and much longer service life than the Woven Wire Screen.
TR shale shaker screens are available for FLC Series, Brandt VSM, Cobra Series, Swaco Mongoose and KEM-TRON shale shakers. We accept customized shale shaker screens according to client’s design. Till now, we have been the leading China OEM supplier of good quality and high performance shaker screens for over 11 years. Our shaker screen has exported to many countries like Egypt, Indonesia, Thailand, Pakistan, Dubai, Iraq, India, South Africa, Nigeria, Canada and so on.
If you need shaker screens,please feel free to contact us:
Sunny Lee
sunny@trsolidscontrol.com
5″ Liners and 5″ Pistons ordered by Oman Customer
Recently, we received an inquiry from a new customer in Oman. His demand is 5″ liners and 5″ pistons for 7T450 Drillmec pump.
According to the photos and dimensions provided by the customer, we provided drawings for the customer to confirm. After the customer confirmed, we immediately quoted the prices to the customer. The customer was very satisfied and placed a batch of purchase order with us the next day.
After 15 days of production, we have completed this order and are ready to deliver them to the freight forwarder for shipment to the customer’s destination.
We are a manufacturer specializing in producing all kinds of mud pump parts. We can provide many kinds of mud pump parts. If you need any, please contact:< sunny@trsolidscontrol.com >.
TRJBQ11 Direct-Connected Mud Agitators are Sent to The Drilling Site
The production of 14 sets of TRJBQ11 direct -connected mud agitators ordered by oilfield customer from TR Solids Control have been completed and the delivery. They will serve the mixing of oilfield mud soon.
The mud agitator produced by TR Solids Control has diversified structures, which can meet the needs of different working conditions. According to different installation positions, it can be divided into: top entry agitator and side entry agitator; Top entry agitator is divided into horizontal agitator and vertical agitator; Horizontal agitator can be divided into shaft agitator and direct agitator; The TRJBQ11 mud agitators ordered by the customer this time belong to the direct-connected agitator in the horizontal agitator. The direct-connected agitator is directly connected between the motor and the reducer, which reduces the vulnerable parts of the coupling and has large torque.
The mud agitator is mainly composed of motor, reducer, coupling and mixing shaft. It is a mud mixing equipment in the drilling fluid circulation system, which can also be called drilling fluid agitator. The mud agitator produced by TR Solids Control is suitable for mixing mud in non excavation sites such as oil drilling, natural gas drilling, shield construction and urban pile driving. It has compact structure small floor area; It adopts worm and worm reduction drive, which has the advantages of large transmission torque, stable operation and reliable operation.
TR Solids Control is a manufacturer of mud agitators. The company can produce mud agitators of different specifications, models and power sizes, which can meet the use requirements of different construction sites. If necessary, please contact: <sunny@trsolidscontrol.com>
A Batch of Solid Control Equipment Delivery
After in-depth communication and discussion with customer and on-the-spot investigation of customer, TR has reached cooperation with customer.
Dozens of solid control equipment have been completed production and sent to the project construction site on July 12, 2021.
This order includes two shale shakers, two mud cleaners, two vacuum degassers, ten mud agitators and four centrifugal pumps.The hot summer can’t stop TR employees from delivering goods for customers. TR employees work overtime to deliver a batch of solid control equipment in advance for customers.Any inquiry, please contact:<sunny@trsolidscontrol.com>.
