The Advantages of the Solid-Lubricant-Inlaid Bearings

1.Properly and simply designed,widely used;

Oil offering system is an energy waste and time waste set in mechanical design.There is no needs for considering the oil-putting set in design when using the solid lubricant bearing so it can save the oil-putting equipment and at the same time it also design the solid-lubricant-inlaid bearing into alt kinds of shapes in order to meet various needs in special places.Using solid-lubricant inlaid bearing can reduce the costs of the machinery mending and the oil wide range.

2.Being used without oil;

Because of the linear coefficient expansion of the solid lubricant is bigger than that of the metal basement,when the solid-lubricant-inlaid bearing starts to operate,the oil film can transfer to the corresponding friction set to make out self-lubricant.So the solid-lubricant-inlaid bearing can be used in places where the oil or grease cannot be added.It can make out the self-lubricant function even though under high load conditions.

3.Low cost for usage;

Traditional mechanical design asks for frequently aiding oil and checking if the oil watch and the offering set are through in certain period.Because adding oil at regular intervals causes the pollution to the machine itself and the nearby surroundings and increase the maintenance cost.And when the self-lubricant is made out,it can not only make the surroundings clean but also decrease the cost of using the lubricant.

4.The superior functions can be brought into play under high load and low rotating speed.

The solid-lubricant-inlaid bearing is based on the high intensity brass that is centrifuge cast.And then make out the loading function.Use special graphite that has good self-lubricant properties as lubricant to make out the
self-lubricant so that the bearing has included all of their advantages. It can still bring the superior properties in to play even under high load and low rotating speed.

5.The wear resistance can be brought into play even in places the oil firm form into difficulties because of the reciprocating and rocking movement,starting and stopping;

The arrangement principle of the lubricant of the solid-lubricant-inlaid bearing is to ensure that all the parts of the corresponding friction sets have the lubricant function in the operating procession.So the arrangement place of the lubricant should be depended upon the operating direction of the corresponding friction sets.

6.Superior chemical resistance and corrosion resistance;

The lubricant of the solid-lubricant-inlaid bearing is made of special graphite and PTFE.It has steady molecule structures.The metal basement can be chosen according to the different chemical resistance and corrosion resistance of the metal appliance.So the solid-lubricant-inlaid bearing has the superior chemical resistance and corrosion resistance.

7.The product is more competitive,comparing to the similar kinds of products,this kind of products has longer working life and need seldom maintenance.It has longer replacement circle and good properties.

发表评论

电子邮件地址不会被公开。 必填项已用*标注